Project 2a - 6) Final Render

First render facing the tree line.

Second render faces towards the sun setting beach.

Project 2a - 5) Final Render Test

Final render tests were done with light and materials applied to check for any errors. This type of render took less than 1 minute.

Project 2a - 4) Vegetations

Vegetations were added from the AEC extended library.

Project 2a - 3) Lights

Light sources were added after the application of materials. The light sources used were mental ray skylight and target direct. Light quality was adjusted in the environment and effects option window.

Adjusting the render setup with regards to light quality of the final render product.

Project 2a - 2) Test Render

Materials applied undergo several render tests to see if it is usable or to check for any error in orientation. Lights were not included yet in the tests.

Project 2a - 1) Apply material

Materials were applied to each surface using the material editor. Some materials were taken from internet which were then used as bitmap while other materials were taken from 3Ds Max material library.

Material for sand

Material for concrete

Material for wood

Project 1 - 11) Final Render

This is a simple render of the building with terrain included but without materials.

Project 1 - 10) Terrain

The terrain was grabbed from Sketchup.

Toggle terrain to achieve 3D terrain.

Import the terrain into 3Ds Max.

Planar was created and conform onto the terrain.

This is the final terrain in wireframe mode.

Project 1 - 9) Columns and Final Model

The small columns were finaly added for the bridge and stairs.

This is the finished model without rendering.

Project 1 - 8) Trellis

The trellis was constructed using two separates vertical and horizontal parts that were later combined.

Project 1 - 7) Stairs

The stairs was extruded from the plan and elevated using the z axis on different heights.

Project 1 - 6) Door and Bridge

The Door is a draw bridge type connected to the bridge and can be opened and closed.

Project 1 - 5) Roof

The roof was extruded from the plan and elevated along the z axis.

Project 1 - 4) Columns

The height and angle of the columns were extruded from the section of the plan.

Project 1 - 3) Walls

The walls were extruded diagonally using vertex editing.

Project 1 - 2) Floor

The floor was extruded from the plan.

Project 1 - 1) Floor Plan

 The floor plan was taken from AutoCAD drawing.